CVE-2026-80795 PUBLISHED

nfc: nci: fix out-of-bounds write in nci_target_auto_activated()

Assigner: Linux
Reserved: 26.08.2026 Published: 04.09.2026 Updated: 04.09.2026

In the Linux kernel, the following vulnerability has been resolved:

nfc: nci: fix out-of-bounds write in nci_target_auto_activated()

nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS.

ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count:

BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nci] process_one_work+0x2dc/0x500 worker_thread+0x240/0x460 kthread+0x1c0/0x1d0 ret_from_fork+0x10/0x20

The buggy address belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1024 bytes to the right of allocated 1560-byte region [ffff0000c7299000, ffff0000c7299618)

Guard nci_target_auto_activated() with the same check used by nci_add_new_target().

Product Status

Vendor Linux
Product Linux
Versions Default: unaffected
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 0dc59de0075f88404a0f4a2b5233104ef459fbb2 (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 94530ffabfca57e9bff1d207106010014cc84032 (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to afd8605fb43becb892311102844955c3b127fc7e (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 24761d3a5f692df5f7d848caeabcb2afd10917aa (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 50e87e1c0e18d791dcd7dccf30f9a2f3e2cf3951 (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 2f08dbce3b37624ec6b424d759336a99586170ec (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to d7083f41c21b30582e91b2e6de4d54dce74f6f9c (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to 129032c0616d83a5e3e304f6ebf88f14ba01e5f7 (excl.)
  • affected from 019c4fbaa790e2b3f11dab0c8b7d9896d77db3e5 to ac200079db50af81e6b04d058b33ec92901d8edd (excl.)
Vendor Linux
Product Linux
Versions Default: affected
  • Version 3.4 is affected
  • unaffected from 0 to 3.4 (excl.)
  • unaffected from 5.10.267 to 5.10.* (incl.)
  • unaffected from 5.15.218 to 5.15.* (incl.)
  • unaffected from 6.1.185 to 6.1.* (incl.)
  • unaffected from 6.6.154 to 6.6.* (incl.)
  • unaffected from 6.12.106 to 6.12.* (incl.)
  • unaffected from 6.18.47 to 6.18.* (incl.)
  • unaffected from 7.1.11 to 7.1.* (incl.)
  • unaffected from 7.2.1 to 7.2.* (incl.)
  • unaffected from 7.3-rc1 to * (incl.)

References