CVE-2026-80798 PUBLISHED

nfc: llcp: reject PDUs shorter than the LLCP header

Assigner: Linux
Reserved: 26.08.2026 Published: 04.09.2026 Updated: 04.09.2026

In the Linux kernel, the following vulnerability has been resolved:

nfc: llcp: reject PDUs shorter than the LLCP header

Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes before parsing it.

nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/ nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a CONNECT or CC PDU then computes

<pre>tlv_array_len = skb->len - LLCP_HEADER_SIZE; </pre>

as a size_t and hands it to the TLV walk. When the frame is shorter than the header the subtraction wraps to a huge value and the walk runs far past the buffer, an out-of-bounds read.

A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP.

Guard the common receive choke point __nfc_llcp_recv(), shared by both the target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so a short skb is dropped before the rx_work worker parses it. Use pskb_may_pull() rather than a skb->len test so the two header bytes are guaranteed to sit in the skb linear area even for a non-linear skb, matching how the sibling NCI and HCI receive paths validate their headers.

Reproduced with a KFENCE out-of-bounds read via /dev/virtual_nci on linux-next.

Found by 0sec automated security-research tooling (https://0sec.ai).

Product Status

Vendor Linux
Product Linux
Versions Default: unaffected
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to e6ec76a68dce04884dfeccfe5a5f0e9f67c0ec82 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to f36cffea24bf3e2cc29a00d4b51dbcadc087d810 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to a7b9b449f5a5132221fff6adc11a9431ab8cd914 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to 3793d768b40f38bb97265dd5b9a8b8655c4e1b1d (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to eab47618e282602197db287ecbd1b09d356a2515 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to e969e98410051b1ef8cc318bfe0c7e3f24ec766d (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to ae5f20f5842f440b72d030e3a34fe182dd8eae42 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to d3d90243393c48146911c67fd3792b549d21d9e6 (excl.)
  • affected from d646960f7986fefb460a2b062d5ccc8ccfeacc3a to 95674f506c6376d6722a23144c9acd26609771ed (excl.)
Vendor Linux
Product Linux
Versions Default: affected
  • Version 3.3 is affected
  • unaffected from 0 to 3.3 (excl.)
  • unaffected from 5.10.267 to 5.10.* (incl.)
  • unaffected from 5.15.218 to 5.15.* (incl.)
  • unaffected from 6.1.185 to 6.1.* (incl.)
  • unaffected from 6.6.154 to 6.6.* (incl.)
  • unaffected from 6.12.106 to 6.12.* (incl.)
  • unaffected from 6.18.47 to 6.18.* (incl.)
  • unaffected from 7.1.11 to 7.1.* (incl.)
  • unaffected from 7.2.1 to 7.2.* (incl.)
  • unaffected from 7.3-rc1 to * (incl.)

References