In the Linux kernel, the following vulnerability has been resolved:
irqchip/renesas-rzg2l: Fix loss of interrupt
rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a
read-modify-write on the ISCR/TSCR status registers to clear the bit
for the interrupt just handled. Since these registers are
write-0-to-clear per bit, this is racy:
If another interrupt's status bit gets set between the read and the write,
that bit is written back as 0 by the software-constructed value, clearing
an interrupt that hasn't been serviced yet and losing it.
This can be reproduced by triggering multiple interrupts at once, e.g.:
gpioset -c gpiochip0 355=0 353=0 328=0 352=0
Fix this by writing back only the bit being cleared, with all other bits
set to 1, instead of read-modify-writing the whole register. Since 1-bits
are left unchanged by hardware, concurrently-set status bits for other
interrupts are preserved.