CVE-2026-90348 PUBLISHED

wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump

Assigner: Linux
Reserved: 11.09.2026 Published: 17.09.2026 Updated: 17.09.2026

In the Linux kernel, the following vulnerability has been resolved:

wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump

On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT). On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to it are not permitted. ath10k_msa_dump_memory() copies the region with a plain memcpy(), whose optimized __pi_memcpy_generic implementation issues wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in ath10k_snoc_fw_crashed_dump() while collecting the devcoredump:

Unable to handle kernel paging request ... FSC=0x21: alignment fault pc : __pi_memcpy_generic lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc]

The Oops both leaves the firmware RAM dump buffer zeroed (no dump is captured) and crashes the kernel, which in turn breaks modem SSR recovery.

Use memcpy_fromio(), which only performs accesses that are valid for such a device-memory mapping. The generic memcpy_fromio() implementation aligns the source before issuing word-sized reads and stores the destination with put_unaligned(), so it is also safe for the coherent DMA allocation used on the non-reserved-memory path. ath11k and ath12k use the same pattern when copying target memory into crash dumps, so call it unconditionally here too. The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is needed; use __force to keep sparse happy.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1

Product Status

Vendor Linux
Product Linux
Versions Default: unaffected
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to e5bc3658da9c8a535e3fa5c0c875b2a456954e81 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to fed1f662c9f9fd19eeab6c01966b7b5a33804420 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to 838cab267ce9a975776e022f25094f8cbe1625d2 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to eb946595a58decdb4cab1b5f3c972ae66f41f1c8 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to 152e894e90716163c646d70f86b3afeb70442783 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to 7039825a7479df637c4f5d546cb0e1cec18cd8e1 (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to 045d1bfb72d2631ab9ec74afa491aa788ebb57aa (excl.)
  • affected from 3f14b73c38431a6a1ed24de568e18ed89b7082e2 to 4f25071afe9218aaae1c63fbf75e229aa6405319 (excl.)
Vendor Linux
Product Linux
Versions Default: affected
  • Version 5.5 is affected
  • unaffected from 0 to 5.5 (excl.)
  • unaffected from 5.10.270 to 5.10.* (incl.)
  • unaffected from 5.15.221 to 5.15.* (incl.)
  • unaffected from 6.1.188 to 6.1.* (incl.)
  • unaffected from 6.6.157 to 6.6.* (incl.)
  • unaffected from 6.12.110 to 6.12.* (incl.)
  • unaffected from 6.18.52 to 6.18.* (incl.)
  • unaffected from 7.2.6 to 7.2.* (incl.)
  • unaffected from 7.3-rc1 to * (incl.)

References